Wall Plug POE Injector with 48V Power Supply IEEE802.3af for Most Cisco/Polycom/Aastra IP Voip Phones Camera and More, 10/100Mbps

PwrON is specializing in the production of and economical replacement power supply for laptop,tablet,phones and other electrical appliances.Products manufactured with the materials and include multiple smart features safeguarding against IV - incorrect voltage, SC - short circuit, IO - internal overheating . Chargers are certificated with CE FCC etc. Specification: Input: AC100-240V 50/60Hz, Data In: Connects to network switch or router, Output: Data & Power (output voltage: 48V, output current: 0.5A max.); Power feed: V+ 4,5; V- 7,8; Date: 1,2, 3,6; Data rate: 10/100Mbps; PoE Power Transmission Distance: Up to 100m Note:This PoE injector only used for 10/100Mbps network This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the PwrON PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the PwrON PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. Warm tip Please make sure the DC output are accordant before you order.Ensure charging platforms and devices are not overheating, such as overheating, please cut off the power supply, to cool before attempting to chargeKeep the adapter dry. Keep the battery pack away from fire. Keep it away from childrenDon’t attempt to open, throw, hit or shake the adapter. Don’t short-circuit it.Please contact us if you have further questions.

• A great solution for poe devices and non-poe device (extra poe splitter will be required ), the poe power adapter can be used to power PoE devices (built-in poe function or module) such as IP Phone, IP cameras or Access Points etc.
• Input: AC100-240V 50/60Hz; Output: Power (output voltage: 48V, output current: 0.5A max.) & Data
• Support IEEE802.3af PoE injector (15.4 watt), up to 24 watt Power Budget (increase of service life); Provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 100 meters.
• Compatible with most 10/100Mbps Cisco/Polycom/Aastra/Ubiquiti Security IP camera, IP phone, Wireless IP point and other PoE devices.
• SAFETY: Compact and cost effective PoE injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection