HX711 Weight Sensor ADC Module Kit + Digital Load Cell 5KG for Electronic Scale Also for Arduino, with Scale Display Module, 3.5x1.35mm Power Wire

HX711 Module: This is a 24-bit A/D converter chip specially designed for high-precision load cells, with two analog channel inputs and an internal integrated 128 times gain programmable amplifier Operating voltage range: 2.6 ~ 5.5V Operating temperature range: -20 ~ +85℃ The output data rate of 10Hz or 80Hz can be selected; Simultaneously suppress 50Hz and 60Hz power interference; Load cell 5KG： 4 leads, easy to use, It adopts 5-10V driving voltage, and directly outputs the voltage signal due to the change of force. Connect： Red to E+ / Black to E- / Green to A+ / White to A- Features: Two selectable differential input channels. On-chip active low noise PGA with selectable gain of 64 and 128. On-chip power supply regulator for load-cell and ADC analog power supply. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Simple digital control and serial interface: pin-driven controls, no programming needed. Selectable 10SPS or 80SPS output data rate. Simultaneous 50 and 60Hz supply rejection. Current consumption including on-chip analog power supply regulator: normal operation andlt; 1.5mA power down andlt; 1uA Package Included: 1 x Weight Sensor 5KG 1 x HX711 24BIT Precision AD Module 5 x Nylon Guide Column 2 x Alec Disc 2 x M3x10 Screws 1 x 4PIN Female-FeMale Dupont Cables 1 x 3.5mm x 1.35mm Power Cable 1 x Scale Display Module

• HX711 Module: uses 24 high precision A/D converter chip hx711; On-chip active low noise PGA with selectable gain of 64 and 128
• Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Connect the load cells to the HX711 module, red to E+, black to E-, green to A+, white to A-
• Instructions: One end of the sensor is fixed by a screw hole, and the other end is left in the air.Apply force in the direction indicated by the label.Please be careful not to directly press the white latex part to avoid damage to the sensor
• Application: suitable for human body electronic scales, experimental electronic scales, postal electronic scales, kitchen electronic scales, etc.
• Package includes: You will get 1 x Weight Sensor 5KG, 1 x HX711 24BIT Precision AD Module, 5 x Nylon Guide Column, 2 x Alec Disc, 2 x M3x10 Screws, 1 x 4PIN Female-FeMale Dupont Cables, 1 x 3.5mm x 1.35mm Power Cable, 1 x Scale Display Module